Specializing in Gages & Fixtures for the
  Automotive Industry

Jemar Tool Inc.
51268 Fischer Park Drive
Shelby  Twp., Michigan 48316
Phone: (586) 726-6960 / Fax: (586) 726-7525

______________________________________________________

Home
CAD
CAM
Build
Quality Control
Contact Us

Cam Capabilities

 

hyper1.jpg (221851 bytes)

    Since Jemar Tool uses AutoCAD® to do 3d designs, 
Open Mind's hyperMILL® is the program of choice for 
laying cutterpath down. When hyperMILL® is installed 
it becomes an integral part of the Mechanical Desktop's 
interface.

    hyper2.jpg (89113 bytes)

 

Once our fixtures are designed and approved, tooling can be prepared and programmed for CNC machining right from the existing 3d design. No intervention between other programs are necessary. Cutterpath can be produced not only on surface geometry but also direct

 

fad1.JPG (160265 bytes)

    Tool paths are then networked to our CNC machines.

 

(2) CNC PROGRAMMING STATIONS INCLUDES THE FOLLOWING:

 

bullet

hyperMILL® PRO VER.9.1 FOR AUTODESK MECHANICAL DESKTOP VER. 2004DX PROGRAM 
OPERATES INTEL I7 RUNNING ON WINDOWS 7 Professional 64 Bit.

 

SYSTEM INCLUDES:

1TB HARD DRIVE.
16 Gig DDR MEMORY.
ASUS 24" MONITOR.
QUADRO 4500 VIDEO CARD.
DVD ROM.

CNC MACHINES:

(1) HAAS VM-3 MACHINING CENTER

MACHINE ENVELOPE: 

X = 40" (1016mm)
Y = 26" (660mm)
Z = 25" (635mm)

(1) FADAL MACHINING CENTER 

MACHINE ENVELOPE: 

X = 60" (1525mm)
Y = 30" (762mm)
Z = 30" (762mm) 

______________________________________________________

Home ] CAD ] [ CAM ] Build ] Quality Control ] Contact Us ]